diff --git a/extroot.txt b/extroot/extroot.txt
similarity index 100%
rename from extroot.txt
rename to extroot/extroot.txt
diff --git a/lte_recover/README.md b/lte_recover/README.md
new file mode 100644
index 0000000..0d61657
--- /dev/null
+++ b/lte_recover/README.md
@@ -0,0 +1,41 @@
+# LTE Recovery Script for GL-XE300_V1.0 Router Board
+
+This script resets and brings up a Quectel EP06-A LTE modem using `uqmi`.
+
+## What It Does
+
+- Kills stuck `uqmi` processes
+- Stops the active PDP session (with timeout)
+- Blanks and restores the APN
+- Forces `raw_ip=Y` mode
+- Brings interface down and up cleanly
+- Confirms WAN is working (IP + route + ping)
+
+## Why I Made This
+
+Most LTE recovery tools are locked behind vendor-specific web GUIs.  
+This script is built for **OpenWRT 24.10.0** and is intended for users running **command-line only** with no GUI.
+
+Use cases include:
+
+- Deployments where modem control must be done over shell
+- Cron-based or watchdog-based recovery without manual intervention
+- Off-grid or solar-powered systems where the LTE radio is **only active at certain times of day**
+
+If you're running raw OpenWRT and want reliable LTE recovery on CLI, this is for you.
+
+## Requirements
+
+System must be flashed to **OpenWRT 24.10.0** with the **Quectel EP06-A** modem installed.  
+Assumes modem interface is named `wwan` and located at `/dev/cdc-wdm0`.
+
+The script uses an APN of `mobile`, which is valid for **EIOT Club SIM cards** as of this commit.  
+This SIM was selected for its plug-and-play compatibility with OpenWRT and `uqmi`, requiring no manual registration or configuration.
+
+Assumes WAN port has internet access during the first run so the required packages can be installed.
+
+Install required packages:
+
+```bash
+opkg update && opkg install uqmi ip-full iputils-ping uci
+
diff --git a/lte_recover.sh b/lte_recover/lte_recover.sh
similarity index 100%
rename from lte_recover.sh
rename to lte_recover/lte_recover.sh